Szlifierki matrycowe Dynabrade: wybierz odpowiednią konfigurację dla swojego narzędzia!

Dynabrade grinders are available in various configurations. Whether it's the body material, the exhaust the muffler or the gear type, the choice of configuration is crucial to the successful realization and optimization of your application. You don't know how to choose? Well, we've created this guide especially for you! So you can make the best choice for your grinder!

Dynabrade Die Grinders Offering

Before going into the configuration details for Dynabrade Die Grinders, it's worth recalling all the different types of model available today.

Dynabrade STRAIGHT-LINE DIE GRINDERS

Dynabrade offers a full range of straight-line die grinders spanning over various horse powers up to 1 hp. Die Grinders offer innovative design for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the FINEST in Dynabrade quality and innovation!

Vacuum versions are also available, all with conductive hose and sleeves to protect the operator from electrostatic discharge (ESD).

Discover all Dynabrade Straight-Line Die Grinders

EXTENSION DIE GRINDERS

Available in front or rear exhaust. These tools are ideal for work within recesses, bores and other places where an extended reach is needed.

Extension Die Grinders allow operators to extend into work pieces with difficult passages or deep channels that require a longer reach to provide efficient finishing.

Discover all Dynabrade Extension Die Grinders

RIGHT ANGLE DIE GRINDERS

Dynabrade Right Angle Grinders are suited for use in tight spaces and accessing hard to reach areas of a work piece. The Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This help administer the right amount and keep the gear oil on the metal gears.

Highest horsepower and torque levels of any similar competitive product. Right angle geared tools generally operate at lower speeds but with higher torque than a gearless tool.

Vacuum versions are also available, all with conductive hose and sleeves to protect the operator from electrostatic discharge (ESD).

Discover all Dynabrade Right Angle Die Grinders

DYNABRADE 7° OFFSET DIE GRINDERS

Dynabrade 7° Offset Die Grinders are another die grinder option for using properly rated accessories. Gearless tools generally operate at higher speeds and with less torque than a geared tool. This allows doe reduced down time and maintenance.

Vacuum versions are also available, all with conductive hose and sleeves to protect the operator from electrostatic discharge (ESD)

Discover all Dynabrade 7° Offset Die Grinders

DYNABRADE PENCIL GRINDERS

In the final category, we find our Pencil Grinders. That being said, as the configurations are a little different, we have created a dedicated guide for this category of Die Grinders.

Discover all our Die Grinders models here!

Body Material Options

Now that you've seen our full range, it's time to choose the material for your body. Our different models can be created from a composite body, an aluminium body or a steel body. Discover the advantages of each of these materials!

COMPOSITE HOUSING

Compact and lightweight, these Die Grinders are ideal for precision grinding, deburring, and blending. Each tool features a composite overmold housing for reduced vibration and thermal protection.

ALUMINUM HOUSING

These refined Die Grinders are manufactured to ensure high durability and low weight. Each tool is manufactured with the rigidity and strength with a housing machined from a single piece of aluminum bar stock

STEEL HOUSING

Features high quality steel housings. Ideal for heavy-duty applications where durability is required. Featuring a rubber over grip to insulate the operator from vibration and cold air transmission. Ideal for use in shipyards, foundries, steel fabrication and welding operations.

EXHAUST AND MUFFLER OFFERINGS

Choose now between front exhaust, rear exhaust standard muffler and rear exhaust extended muffler. Discover all the differences below:

FRONT EXHAUST

Front exhaust tools direct debris away as tool is running, allowing clear view of work surface.

REAR EXHAUST

Abbreviated length of Standard Muffler is ideal for smaller hands. It may be used with overhose assembly.

EXTENDED MUFFLER

Extended Muffler design is ideal for larger hands, as the tool length is extended to accommodate the tri-muffling technology. It may be used with overhose assembly.

GEARED AND GEARLESS TOOL OFFERINGS

You want to know the difference between Dynabrade Geared and Gearless tool? It's quite simple. Geared Tools generally have higher torque levels and broader power range, while Gearless Tools offer reduced maintenance and downtime. Tool RPM and configuration dictates the presence of gearing.

TWO TYPES OF GEARING

If you go for a Geared Tool, there are two types of gearing:

• • Planetary gears are inline speed reduction gears. The greater the reduction, the higher the torque levels.
  • Right angle bevel gears turn the spindle of the machine 90° from the motor. Typically there is a speed reduction but not as much as planetary gears.

GEARED TOOL ICON

This symbol features higher torque levels and a broader range.

GEARLESS TOOLS

• Gearless tools have lower vibration levels due to the omission of transmitting power through gears
• They offer a tool with fewer wearable parts, resulting in reduced maintenance and downtime
• Among tools with the same horsepower rating, gearless tools will generally have lower torque levels than geared tools.

GEARLESS TOOL ICON

This symbol identifies a Dynabrade tool that operates with no gears.

Discover all our Die Grinders models here!

DYNABRADE DIE GRINDER COLLETS AND INSERTS

• COLLET: Device used to hold carbide burrs, rotary files, mounted points and wheels, etc.
• BODY: The part of the collet that secures to the spindle of the tool and accepts the insert.
• CAP: Secures collet body and retains insert.
• INSERT: The collapsible portion of the collet that retains the shank of the inserted tool.

COLLET ASSEMBLY TYPES

Dynabrade Collet Assemblies for Die Grinders are also available in differents types:

• TWO-PIECE: Insert threads into the body.
• THREE-PIECE: Insert slips into body; cap threads to body, retaining the insert.
• FOUR-PIECE: Insert slips into body; nut retains cap and insert.
• INTEGRATED: Collet body is integrated into tool.

CHOOSING THE CORRECT COLLET

To choose the right collet, it is important to considered not only the collet type but also the size. Dynabrade Collet are available in the following sizes:

• 1/4"
• 3/8"
• 6 mm

All Dynabrade Die Grinders include 1/4" and 6 mm inserts*, but the design of the collet also allows the use of optional inserts available in different sizes :

• 1/16"
• 3/32"
• 1/8"
• 3/16"
• 1/4"
• 3/8"
• 2 mm
• 3 mm
• 6 mm
• 8 mm

*Note that all Dynabrade Die Grinders are mounted with Imperial size insert (e.g: 1/4"). Metric inserts (e.g: 6 mm) are in the box .

Discover in the tab below our complete offering:

ACCESSORIES

Finally, to complete your tool, Dynabrade offers a wide range of Carbide Burr kits in different shapes and sizes.

CARBIDE BURR KITS

Kits (1/8", 3 mm, 1/4" or 6 mm) includes one Carbide Burr of each shape:

• 93351: 1/8" Burr Shaft Size, Quantity 12
• 93381: 3 mm Burr Shaft Size, Quantity 12
• 93350: 1/4" Burr Shaft Size, Quantity 8
• 93380: 6mm Burr Shaft Size, Quantity 8

METAL SPECIFIC CARBIDE BURR KITS

These Metal Specific Carbide Burr Kits provide maximum productivity and performance for Stainless Steel, Titanium, Nickel Alloys, Aluminum and Non-Ferrous metals.

• 94020: For Inox Stainless Steel, 1/4" Burr Shaft Size, Quantity 5
• 94021: For Alloys, 1/8" Burr Shaft Size, Quantity 10
• 94022: For Aluminum & Non-Ferrous metals, 1/4" Burr Shaft Size, Quantity 5

Now that you know all the possible features and configurations for Dynabrade grinders, it's time to find the perfect model for you!

Discover all our Die Grinders models here!